US flag Official website of the Department of Homeland Security

Chapter 73

CBPL methods do not include proprietary information such as ASTM Standards.

Articles of iron or steel

73-01
Standard Test Method for X-Ray Emission Spectrometric Determination of Cerium and Lanthanum in Carbon and Low-Alloy Steels (ASTM E 1063-94)

73-02
Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated Welded and Seamless (ASTM A 53-99b)

73-03
Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler Tubes (ASTM A 178/A 178M-95)

73-04
Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes (ASTM A 179/A 179M-90a)

73-05
Specification for Electric-Resistance-Welded Carbon Steel Boiler and Superheater Tubes for High Pressure Services (Discontinued in 1997) (ASTM A 226/A 226M-95)

73-06
Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) (ASTM B 498M-93)

73-07
Guide for the Selection of Committee F-16 Fastener Specifications (ASTM F 1077-95a)

73-08
Mechanical and Material Requirements for Externally Threaded Fasteners (SAE J429)

73-09
Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs (ASTM F 593-98)

73-10
Specifications for Carbon and Alloy Steel Nuts (ASTM A 563M-00)

73-11
Specifications for Steel Springs, Helical, Heat Treated (ASTM A 125-96)

73-12
Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys (ASTM E 353)

73-13
Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys (ASTM E 1019)

73-14
Standard Guide for Reflected-Light Photomicrography (ASTM E 883)

73-15
Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials (ASTM E 18)

73-16
Standard Practice for Microetching Metals and Alloys (ASTM E 407)

73-17
Standard Test Method for Macroetching Metals and Alloys (ASTM E 340)

73-18
Standard Practice for Preparation of Metallographic Specimens (ASTM E 3)

73-19
Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel (ASTM E 415)

73-20
Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis (ASTM E 1252)

73-21
Guidelines for Elemental Qualitative Analysis by X-ray Fluorescence (USCL 72-32)

73-22
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (ASTM F 606)

73-23
Recommended Guidelines for the Identification of Polymeric Materials

Last modified: 
November 12, 2013