US flag Official website of the Department of Homeland Security

Chapter 39

CBPL methods do not include proprietary information such as ASTM Standards.

Plastics and articles thereof

39-01
Test Method for Aromatic Hydrogen and Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy (ASTM D 5292)

39-02
Practice for Qualitative Identification of Polymers in Emulsion Paints (ASTM D 3168)

39-03
Practice for Identification of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry (ASTM D 4128)

39-04
Practice for Packed Column Gas Chromatography (ASTM E 260)

39-05
Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs (ASTM E 1510)

39-06
Test Method for Infrared Identification of Vehicle Solids from Solvent-Reducible Paints (ASTM D 2621)

39-07
Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products (ASTM D 2008)

39-08
Practice for Rubber Chemicals - Determination of Ultraviolet Absorbance Characteristics (ASTM D 2703)

39-09
Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near Infrared Spectrophotometers (ASTM D 275)

39-10
Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement (ASTM D 792)

39-11
Standard Test Methods for Determination of Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR) (ASTM D 5594)

39-12
Specification for Polyethylene Plastics Molding and Extrusion Materials (ASTM D 1248)

39-13
Terminology in HTSUS Section VII

39-14
Test Method for Field Identification of Coatings (ASTM D 5043)

39-15
Test Method for Extractable Matter in Textiles (ASTM D 2257)

39-16
Test Method for Dilute Solution Viscosity of Polymers (ASTM D 2857)

39-17
Test Method for Determining Inherent Viscosity of Poly(ethylene terephthalate) (PET) (ASTM D 40603)

39-18
Test Method of Moisture Content of Paper and Paperboard by Oven Drying (ASTM D 644)

39-19
Test Method for Tensile Properties of Thin Plastic Sheeting (ASTM D 882)

39-20
Practice for Calibrating the Magnification of a Scanning Electron Microscope (ASTM E 766)

39-21
Practice for Scanning Electron Microscope Performance Characterization (ASTM E 986)

39-22
Practices for Internal Reflection Spectroscopy (ASTM E 573)

39-23
Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Spectroscopy (FT-IR) (ASTM D 5477)

39-24
Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis (ASTM E 1642)

39-25
Practice for Dissolving Polymer Materials (ASTM D 5226)

39-26
Medical Devices: Patient Examination and Surgeons' Gloves; Adulteration

39-27
Guidelines for the Identification of HTSUS Section VII Materials

39-28
Test Methods for Nonvolatile Content of Resin Solutions (ASTM D 1259)

39-29
Standard Practices for General Techniques of Infrared Microanalysis (ASTM E 334)

39-30
Loss on Drying (USP 731)

39-31
Loss on Ignition (USP 733)

39-32
Nuclear Magnetic Resonance (USP 761)

39-33
Textiles - Woven Fabrics - Determination of Mass per Unit Length and Mass per Unit Area (ISO 3801)

39-34
Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension (ASTM D 412)

39-35
Standard Test Methods for Determination of Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR) (ASTM D 5594)

39-36
Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis (ASTM E 1252)

39-37
Standard Practices for General Techniques of Infrared Microanalysis (ASTM E 334)

39-38
Guidelines for Elemental Qualitative Analysis by X-ray Fluorescence

39-39
General Rules for X-ray Diffractometric Analysis (JIS K 0131)

39-40
Standard Test Method for Ash Content in Thermoplastics (ASTM D 5630)

39-41
Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance (ASTM D 5017)

39-42
Analysis of Plastic by Light Microscopy

39-43
Scanning Electron Microscopy (USP 1181)

39-44
The Thread Test for Distinguishing Waxes from Polymers

39-45
Guidelines for Verification of Visa Weight ("Net-Net") of Textile Importations (CBPL 42-10)

39-46
Standard Guide for X-ray Emission Spectrometric Analysis (ASTM E 1621)

39-47
Polyvinyl Alcohol (USP/NF Official Monograph: "Polyvinyl Alcohol")

Last modified: 
November 12, 2013