US flag Official website of the Department of Homeland Security

Lapse in Federal Funding Impact on CBP Website Operations Notice

NOTICE: Due to the lapse in federal funding, this website will not be actively managed. This website was last updated on December 21, 2018 and will not be updated until after funding is enacted. As such, information on this website may not be up to date. Transactions submitted via this website might not be processed and we will not be able to respond to inquiries until after appropriations are enacted.


Aviso del impacto de la interrupción de fondos federales en las operaciones del sitio web del Oficina de Aduanas y Protección Fronteriza de los Estados Unidos (CBP, por sus siglas en inglés)

AVISO:  A causa de la interrupción de fondos federales, este sitio de web no será administrado activamente. La última actualización a este sitio web se realizó el 21 de diciembre de 2018 y no se harán más actualizaciones hasta que el gobierno reanude operaciones; por ende, puede que el sitio web no refleje la información más reciente. Es posible que no podamos procesar transacciones ni responder a
preguntas hasta que se reanuden operaciones.

Chapter 32

CBPL methods do not include proprietary information such as ASTM Standards.

Tanning or dyeing extracts; tannins and their derivatives; dyes, pigments and other coloring matter; paints and varnishes; putty and other mastics; inks

Recommended Guidelines for the Analysis of Synthetic Coloring Matter

Test Methods for Chemical Analysis of White Titanium Pigments (ASTM D 1394)

Specification for Titanium Dioxide Pigments (ASTM D 476)

Test Methods for Coarse Particles in Pigments, Pastes and Paints (ASTM D 185)

Test Method for Pigment Content of Solvent-Reducible Paints (ASTM D 2371)

Practice for Separation of Vehicle from Solvent-Reducible Paints (ASTM D 2372)

Test Method for Infrared Identification of Vehicle Solids from Solvent-Reducible Paints (ASTM D 2621)

Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes (ASTM D 480)

Specifications for Aluminum Powder and Paste Pigments for Paints (ASTM D 962)

Guide for Testing Print Ink and Related Materials (ASTM D 5010)

Standard Practices for General Techniques of Infrared Microanalysis (ASTM E 334)

Loss on Drying (USP (731))

Loss on Ignition (USP (733))

Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis (ASTM E 1252)

Standard Test Method for Ash from Petroleum Products (ASTM D 482)

Guidelines for Elemental Qualitative Analysis by X-ray Fluorescence (USCL 72-32)

Standard Test Method for Volatile Content of Coatings (ASTM D 2369)

Standard Test Methods for Nonvolatile Content of Resin Solutions (ASTM D 1259)

Standard Practice for Qualitative Identification of Polymers in Emulsion Paints ASTM D 3168)

Last modified: 
November 12, 2013